MICRO-FOL™ MICRO-MINIATURE SPOT LUMINAIRES - Zoom-and-Dim Spotlights with Pure-white, Stone-Cold Light

The MICRO-FOL™ Zoom-and-dim Spotlight couples the black parabolic reflector of a PARA-FOL™ with a patented lens designed specifically for a fiber optic source. The result is an awesome miniature spotlight giving pure-white, stone-cold NoUVIR light that easily adjusts from a 15° spotlight to a 50° floodlight and anywhere between.

Features:
  • Even 3:1 zoom from a 15° to a 50° beam
  • Uniform perfectly circular beam
  • Soft clean beam edges, no visible spillover.
  • No halos, aberrations or dark spots.
  • No peaks or hot spots.
  • Stone-cold, pure-white light (3200K)
  • No UV, No IR.
  • 10-year warranty on structure and optics
Specifications:
  • 3/8" diameter body
  • 1-1/2" overall length
  • Powered by one 3mm (1/8") fiber
  • Externally threaded for simple mounting
  • Mounting nuts and neoprene seal included
  • 1/2" knurled FIBER-LOCK™ locks adjustments
  • U.S. Patents 5,268,977, #5,486,984
Click HERE for Spot Luminaire pdf


MICRO-FOL™ ZOOM-AND-DIM SPOT LUMINAIRES

ZDSL ~ ZOOM-AND-DIM SPOT LUMINAIRE
NoUVIR's ZDSL MICRO-FOL™ spot is a basic spotlight for mounting through a ceiling or panel. A small 3/8" diameter body and a superb optical system designed specifically for a fiber optic light source give awesome performance and a range of adjustment impossible until now. Adjustable from a 15° beam spotlight to a wide angle 50° conical flood, the ZDSL is a lovely and versatile downlight in areas where a beam needs to be zoomed to a specific and exact size on a floor or an object.

Order the ZSBL for a spot with a 90° mounting bracket allowing either a 3/8" or a 1-1/2" centerline offset.

ZSBA ~ ZOOM-AND-DIM SPOTLIGHT WITH BRACKET AND AZ-EL MIRROR
With the patented AZ-EL mirror and a mounting bracket, the ZSBA MICRO-FOL™ is our most popular luminaire. The ZSBA spot can be tucked into corners and behind trim almost anywhere to provide illumination exactly where it is needed. The AZ-EL mirror allows the beam of light to be rotated 360° around the axis of the luminaire and aimed 45° to 90° off axis. This is a wonderful luminaire for display cases.

Order a ZDSA for a flush-mount AZ-EL mirror spot without a bracket.

ZSAP ~ ZOOM-AND-DIM SPOTLIGHT WITH AZ-EL MIRROR PENDANT
NoUVIR's MICRO-FOL™ spots may also be ordered as a pendant fixture on black 1/4" OD aluminum tubing in any length 6" to 72" long. (Specify total length including luminaire.) Pendants can be bent on a 6" radius and mounted in any orientation. Pendant includes washers and nuts for mounting.

Order a ZDSP for a spotlight pendant luminaire without the NoUVIR AZ-EL mirror.

ZSAP ~ ZOOM-AND-DIM SPOTLIGHT WITH AZ-EL MIRROR PENDANT
The ZDST is a MICRO-FOL spot pre-mounted on a clip that can be used in NoUVIR's FIBER-TRACK™, CORNER TRACK™ or RECESSED T-BAR FIBER-TRACK™. Track-mounted luminaires are secure, concealed, and can be covered with a snap-on clear polycarbonate lens, yet they can be moved, rearranged, and re-aimed over and over. See Section 4 - Tracks and Bannister.

The ZDFT is a MICRO-FOL spot pre-mounted on a clip to fit FLAT-TRACK™ and FIBER-RAIL™.

ZDEL ~ Zoom-and-Dim spotlight Eyeball Luminaire
The ZDEL SPHERE-FOL™ spot eyeball uses a single standard fiber and has the optical characteristics of the MICRO-FOL spotlight (smooth, even, 15° to 50° beam adjustment). In addition, the ZDEL SPHERI-FOL™ spot eyeball is fully sealed, can be aimed up to 30° off axis from above or below, and locks in place. Installed the ZDEL looks absolutely elegant with only a 1-1/4" diameter bezel ring visible. The ZDEL can be installed in a case top and completely aimed and adjusted from outside the case.

For more concealment, order ZDER for a deeper recessed eyeball with a 15° off axis adjustment.

Call us for a free 130-page catalog with full technical data on all of our products.